[cw-discuss] USB PORT on Crosssover Office Standard 5.0 not detect?

[octav]

Thanks  Matt,for your guidance, but why when I click "Configuration" button  
there is no response..?..is it that my Crossover Office Standard 5.0 is trial 
version...?


ths,

Octav

On Saturday 10 February 2007 02:10, Matthew Frost wrote:
> octav wrote:
> > Hi Matt,
> >
> > What do you mean ...Go to the "Driver" tabs and select "autodetect...",
> > where I can find that step...?
>
> From the Crossover configuration app, select your bottle and click
> "Configure". Go to the "Control Panel" tab and select the winecfg entry. 
> The Wine configuration window wil come up.  In that window, you will see a
> tab marked "Drives".  In that tab should be a scrollbox full of drive
> letter associations and drive mappings.  Under that scrollbox you should
> see three buttons, marked "Add..." "Remove" and "Autodetect...". 
> Autodetect will assign letters to every drive it can find.  I'm not sure
> whether it greps /etc/fstab for mount points, but that seems most likely.
>
> > ths,
> >
> > (Sorry about my poor english)
>
> np.
>
> > Octav
>
> Matt
>
> > On Wednesday 07 February 2007 20:52, Matthew Frost wrote:
> >> As long as your USB drive gets recognized when you connect it (a la
> >> udev), you can have crossover/winecfg automatically assign a drive
> >> letter.  Go to the "Drives" tab and select "Autodetect...".  Otherwise,
> >> as long as you can mount it, and have winecfg set up drive letters
> >> properly for your permanent partitions anyways, you should be able to
> >> navigate to / and find your mount point.  But don't rely on crossover to
> >> detect the USB device.  Let linux deal with the filesystem and device,
> >> so that crossover can deal with presenting them to your application.
> >>
> >> Matt