[cw-discuss] wine config

[Chris Decker]

The program also has the following registry settings:
\registry\machine\system\currentcontrolset\services\ParalUSP
    DependOnGroup =     REG_MULTI_SZ    "Parallel arbitrator"
    DependOnService =     REG_MULTI_SZ    "Parport"
    Type =         REG_DWORD    0x00000001
    Tag =        REG_DWORD     0x00000002
    Start =        REG_DWORD     0x00000002
    Group =        REG_SZ        Extended base
    ErrorControl =     REG_DWORD    0x00000000


I am not sure if the service is available.   There is also a driver file (
paral400.sys) that exists.  Under Windows this driver file is put in
config.sys.  I don't know if there is a similar thing in Crossover.

On 10/25/06, Chris Decker <crdecker at gmail.com> wrote:
>
> Yup, read all that...
>
> On 10/25/06, Tom Wickline <twickline at gmail.com> wrote:
> >
> > On 10/25/06, Chris Decker <crdecker at gmail.com> wrote:
> > > Tried that..  have several soft links in dosdevices, but it the
> > program
> > > doesn't seem to recognize the existence of the lpt1 port.  It does,
> > however,
> > > see the COM ports...
> > >
> >
> > Have you read this :
> > http://www.codeweavers.com/support/docs/crossover-standard/print-setup
> > and
> > http://www.codeweavers.com/support/docs/wine-user/config-printing
> >
> > Tom
> >
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://crossover.codeweavers.com/pipermail/discuss/attachments/20061025/2083aa85/attachment.htm